Riello-ups MultiCOM 401 Manual de usuario descargar pdf (Pagina 19)

GATEWAY INTERNAL PARAMETERS

These parameters are used in the ProfiDrive mode

Index Data type R/W access Description

802 Unsigned8 Read-write Saving PZD setting to the gateway seeprom:

0 - nothing

1 - clear non-volatile PZD setting

2 - store the current PZD setting to non-volatile memory

3 - restore the PZD settings from non-volatile memory

These parameters are used to identificate the gateway application type and application version.

Index Data type R/W access Description

800 Unsigned16 Read-write Gateway application type

801 Unsigned16 Read only Gateway application version

High byte - version

Low byte - subversion

PROFIDRIVE STANDARD PARAMETERS

These parameters are defined by profibus standard. They are used in ProfiDrive mode.

Index Data type Description

915 [8] Unsigned16

(Array)

PZD configuring, setpoint telegram

Parameter is an array of 8 subindexes for defining output PZD slot

content (0=PZD0; 1=PZD1,... 10=PZD10).

916 [8] Unsigned16

(Array)

PZD configuring, actual value telegram

Parameter is an array of 8 subindexes for defining input PZD slot

content (0=PZD0; 1=PZD1,... 10=PZD10).

918 Unsigned8 Gateway DP address

922 Unsigned16 Telegram selection

Value is 0 (telegram defined by 915,916 parameters)

964 [5] Unsigned16

(Array)

Device identification

Array parameter with the following subindices meanings:

Manufacturer code, device type, version, year, day+month

965 Unsigned16 Profile version and subversion (first and second byte)

971 Unsigned16 Saving parameters to the flash

A change from 0 to 1 in this parameter value causes saving

application parameter to flash (so actually two writings to 971 are

needed for the request to save all parameters to flash).

NOTE: Currently this parameter is not supported

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Sin comentarios

Riello-ups MultiCOM 401 Manual de usuario Pagina 19